Clean your bottle with soap & water- dry completely.
1
3
Overlap the sticker on itself as you wrap it around the bottle, make sure to line up the bottom edge with the previous layer.
2
Peel 2-3 inches of backing from the "peel this end first" left side of the sticker
4
Apply pressure and smooth out any bumps or wrinkles as you wrap.
If your sticker doesn't line up perfectly, no worries! Carefully peel it up and try again- the vinyl is very forgiving.
Recommended: Add heat via a blow dryer or heat gun to your sticker and apply pressure to add extra strength to the stick!
Note: Wrap up cylindrical bottles only. Infinity Stickers are not designed for tapered or curved vessels.
PHONES, LAPTOPS, JOURNALS, TABLETS
1
Clean & dry your surface.
3
Trim the side and overlap. Try making layers by placing one side over the other to create depth.
2
Stick your first layer
4
Repeat until you are happy with your layers.
Have fun and be creative! Infinity Stickers are meant to spark your imagination and to cover your objects in art. Don't be afraid to collage, cut, layer and make them your own.
Need some sticking inspiration?
CARS, SKIS, RACKS, BOATS, COOLERS
1
Clean and dry your surface in a climate above 50°
3
Peel, place and firmly press/apply pressure over the entire area.
2
Determine the perfect spot to stick. Make a paper template first if you need to do some trimming around car logos and windows.
4
Recommended: Add heat via blow dryer or heat gun to your sticker and applying pressure to add extra strength to your stick.
For cars, skis, boards, boats and racks: after applying heat, let your sticker cure for at least 24 hours before taking it on your next adventure.​
Note: Windshield wipers have been known to beat up on vinyl decals. We reccommend you stick out of range of wipers.
